Wind Turbine H-2 Horizontal-Axis Three-Blade 2kW at rated windspeed of 11 m/s. Rotor diameter is 3.7 meters. Octagonal monopole tower heights of 6m, 9m, and 12m with optional hydraulic tilt-up. Foundation options include standard form/rebar with poured concrete, pre-fabricated concrete, and concrete-less steel structure (direct-burial). Controller and Inverter sold separately with options for on-grid and off-grid applications.
Wind Turbine | H-2 | Horizontal-Axis | Three-Blade | 2 kW
$11,800.00Price
- Three-Blade Up-Wind Stall or Pitch Regulated Rotors.
- Rotor Blades fabricated from recyclable materials.
- Radial-Flux Permanent Magnet Generators (RF-PMG).
- Yaw System options include passive (tail vane) with high-wind speed furling (yaw 90 degrees to wind direction) and field-oriented control (FOC) motorized utilizing anemometer and yaw vane sensors with electro-mechanical pinion-gear drive.
- Slip-Rings used for all power and signal wiring to prevent hanging power cables from twisting up.
- Low-Wind Optimized for IEC Wind Classes III and IV with cut-in windspeed as low as 2.0 m/s.
- Optional Cold Climate Coatings from HEMPEL for blades and towers.
- Bird Avoidance single-black or single-red blade for H-20, H-30, H-50, H-60, and H-100 available.
- Comprehensive sensor package with blade load measurement, condition-based monitoring, and advanced control features to decrease down-time and increase energy production.
- Tower options include rooftop, monopole, hydraulic tilt-up, lattice-truss, and sectional vertical flange types.
- Foundation options include form/rebar with poured concrete, pre-fabricated concrete, and concrete-less steel structure (direct-burial).
- Custom Paint and Decal Options available.